Radial Engineering Twinline handleiding
Handleiding
Je bekijkt pagina 8 van 16
Radial Engineering Ltd.
Twinline™ Effects Loop Router
True to the Music
®
6
Select loop-A using the A-B switch on the Twinline front panel. The LED
indicator will illuminate to let you know which channel is active. Bypass
your effects by setting the FX ON switch to the OFF (OUT) position – this
LED will go off. Slowly bring up the volume on your rst amp and test.
Always test at low volumes to ensure things are working before turning
up. This can help eliminate turn-on or connection transients from cables
that may not be seated correctly.
Once you have conrmed the signal is passing, activate the Twinline by
depressing the FX ON switch. The LED will illuminate. You can now play
using your effects. It is a good idea to use a clean effect such as a delay
or chorus to set the levels. If you hear distortion, reduce the SEND level
on the Twinline and then adjust the RECEIVE level for gain make-up. If
the sound seems thin… increase the SEND level to suit. You cannot harm
pedals by overloading them, they will simply distort.
It is important to note that when combining various products together
such as amps, switchers and pedals, it takes a bit of ddling to get the
levels to work properly. Be patient and try different settings. Take notes
on your setups by using the handy setup page at the end of this manual.
This reference will surely come in handy when changing or trying various
setups.
You are now ready to test the second amps effects loop. To do this, select
Amp-B using the front panel AB switch, bypass the effects for testing (FX
switch out) and then if all is good, reactivate the effects (FX switch -in).
Set your levels to suit this amp and you are now ready to rock!
Amp-A
Select
Amp-B
Select
GETTING STARTED
You are now ready to power up. Make sure the volume levels on your
amps are turned down before turning them on. Plug in the Twinline’s
power supply, turn on your amps. Set the send and receive loop controls
on the Twinline to 12 o’clock. If your amp has variable level controls, they
should be set to the manufacturer’s recommended setting to start.
Bekijk gratis de handleiding van Radial Engineering Twinline, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Twinline |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2700 MB |
