Radial Engineering Twinline handleiding
Handleiding
Je bekijkt pagina 7 van 16
True to the Music
®
Radial Engineering Ltd.
Twinline™ Effects Loop Router
5
Next, connect your pedalboard (guitar effects) or studio processors to
and from the Twinline:
1. usInG unBalanCed GuITar Pedals:
a. Make sure the rear panel effects select switch is set to the UNB
(unbalanced) OUT position. This switch is recessed to prevent
accidental switching.
b. Connect from the Twinline SEND to the input of your rst pedal.
c. Connect from your last pedal to the Twinline RECV (receive).
2. usInG a BalanCed sTudIo ProCessor:
a. You will need two balanced XLR cables.
b. Set the rear panel effects select switch to BAL (balanced) IN position.
c. Connect from the Twinline XLR SEND to the input of your processor.
d. Connect from your processor to the Twinline RECV (receive) XLR
input.
Bekijk gratis de handleiding van Radial Engineering Twinline, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Twinline |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2700 MB |
