Radial Engineering Headload handleiding
Handleiding
Je bekijkt pagina 7 van 16
Radial Engineering Ltd.
Headload Guitar Amp Load Box
True to the Music
®
4
13. JDX PRE-EQ: Outputs the JDX signal
before the two band EQ and speaker
voicing. Used to feed the FOH system.
Balanced output for driving long cables.
Transformer isolated to eliminate noise
caused by ground loops. Equipped with
ground lift and polarity 180° reverse.
14. JDX POST-EQ: Outputs the JDX signal
after the EQ and voicing controls. Used
to feed the on-stage monitor system.
Balanced output for driving long cables.
Equipped with ground lift.
15. FAN: Cooling fan is powered by your
amp. The harder you drive your amp,
the faster the fan moves.
16: POST-JDX (POST-EQ): Outputs an
unbalanced (¼” line) JDX signal. Used
for feeding additional effects, monitors
or amps.
17. PRE-JDX (DIRECT): Outputs the
direct amp signal before the JDX signal
processing.
18. LEVEL: Ganged control sets the output
level for both unbalanced ¼” outputs.
19. POWER SUPPLY: The external
power supply uses a locking 4-pin
XLR connector to prevent accidental
disconnection.
20. FROM AMP: Connects your amplifi er
speaker output. Depending on which
Headload you have, one of the jacks
will be plugged.
21. TO SPEAKERS: Connects to your
speaker cabinet. Total speaker
impedance (Ohms) must match your
amp and the Headload.
REAR PANEL FEATURE SET
13 14 1915
2120
181716
Bekijk gratis de handleiding van Radial Engineering Headload, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Headload |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2239 MB |
