Rademacher RolloTron Comfort DuoFern 1800 handleiding

Niet gecategoriseerd

Rademacher

88 pagina's

PDF beschikbaar

Handleiding

15. Initial commissioning with the help of the installation wizard

An installation wizard is available in order to help you

configure the RolloTron Comfort DuoFern quickly and

easily. The wizard automatically guides you through the

conguration process for initial commissioning or after

a software reset (see page 73).

Quitting the installation wizard.

Pressing the [ M ] key for 2 seconds causes the installation

wizard to be cancelled prematurely.

Readiness for operation

The RolloTron Comfort DuoFern is ready for use as soon as

the installation wizard has nished.

In addition, you can individually customise your settings

and make changes at any time from the main menu and

the system settings menu.

Additional information about conguring the end

points

The end points must be congured in order for the roller

shutters to stop at the desired upper and lower positions.

It is imperative that both end points are configured,

otherwise malfunctions may occur.

IMPORTANT

◆ If the RolloTron Comfort DuoFern is operated without

an end point setting, the drive will continue to run

for as long as one of the two control keys is actuated.

◆ The automatic functions remain blocked until the end

point setting is congured.

◆ Do not set the upper end point right up to the limit

stop.

◆ Please ensure that the belt is not excessively slack when

reaching the lower end point.

◆ Release the key promptly and never allow it to extend

beyond the respective end point. Failure to do so can

cause overloading and may damage the roller shutters

and / or drive.

NOTE

◆ After a period of time it may be necessary to recong-

ure the end points as the belt may elongate during the

process of operation due to stretching.

Bekijk gratis de handleiding van Rademacher RolloTron Comfort DuoFern 1800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.