QSC unDNEMO-BT handleiding
Handleiding
Je bekijkt pagina 9 van 25
unDNEMO/unDNEMO-BT
User Manual
Attero Tech LLC 2020 Page 8 614-00032
2.2 – Audio Modes
The user may cycle through the available audio modes by pressing the “Select” button to step through the available modes.
*Note: that for all diagrams that show Bluetooth audio source / sink connectivity, this functionality is specific to the unDNEMO-BT
and is omitted on the unDNEMO.
* The Aux Mode is replaced by a Line Input mode on the unDNEMO
Figure 5 - Audio Mode Screen Flow
All audio modes are accessed based on the order shown in * The Aux Mode is replaced by a Line Input mode on the unDNEMO
Figure 5. If any of the configurable modes are disabled, those modes will simply be skipped when selecting the next mode.
*Note: By default, only the Net Mode is enabled, pressing the “Select” button when only Net mode is enabled will result in the
message “Unsupported Function” to be shown briefly on the display.
In the audio modes, the volume “+” and volume “-” buttons always adjust the speaker and headphone volume. The volume range
is 1 to 10. Additionally, the speaker mute button always operates as an audio mute function for the internal speaker and any
attached headphones. The mute buttons indicate mute state by lighting their associated red LED when mute is.
When headphones are plugged into the unDNEMO-BT, the internal speaker is automatically disabled until they are removed.
*
Bekijk gratis de handleiding van QSC unDNEMO-BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | unDNEMO-BT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4700 MB |
