QSC Synapse D32o handleiding
Handleiding
Je bekijkt pagina 7 van 13
Attero Tech by QSC Synapse D32o
User Manual
Ó QSC, LLC 2020 614-00049
2 – Device Installation
2.1 – Mounting
The case for the D32o is designed ready to fit in a standard 19”
rack. The rack mount tabs are built in to the front panel of the
unit (rack screws are not supplied). Use four screws to secure
the unit to the rack. Dimensioned drawings can be downloaded
from the Documents section of the Synapse D32o product page.
Figure 1 – Mounting and Dimension Information
2.2 – Audio Connections
All connections to the Synapse D32o should be made before the
power is applied. Attach audio destinations to the analog audio
outputs. The analog audio outputs are balanced, so be sure to
check what input type the destination device uses in order to
find how to connect it correctly. Refer to the following diagrams
and instructions for connecting different types of audio devices.
2.2.1 – Balanced Output to Balanced Input
Figure 2 – Balanced Wiring Guide
2.2.2 – Balanced Output to Unbalanced
Input
Figure 3 – Unbalanced Wiring Guide
+
-
3-Wire Cable
Pin 1
Pin 2
GND
Balanced Output
Terminal Block Plug
Pin 3
1
2
3
XLR-M
+
-
3-Wire Cable
Sleeve
Tip
GND
Ring
1
2
3
TRS Plug
Balanced Output
Terminal Block Plug
Balanced Output
Terminal Block Plug
2-Wire Cable
Sleeve
Tip
TS Plug
Balanced Output
Terminal Block Plug
+
-
2-Wire Cable
Sleeve
Tip
RCA Plug
GND
+
-
GND
Bekijk gratis de handleiding van QSC Synapse D32o, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | Synapse D32o |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3083 MB |
