QSC QIO-AES8x8 handleiding
Handleiding
Je bekijkt pagina 17 van 26
17
QIO-FLEX4A Front Panel
POWER
ID
QIO-FLEX4A
PERIPHERAL
1
2
3
1. Power LED – Illuminates blue when the Q-SYS QIO-FLEX4A is powered on.
2. ID LED – LED blinks green when placed into ID Mode via ID Button or Q-SYS Configurator.
3. ID Button – Locates the QIO-FLEX4A in Q-SYS Designer Software and Q-SYS Configurator.
QIO-FLEX4A Rear Panel
CH1
CH2
CH3
CH4
FLEX CHANNELS GPIO
OUTPUTS
INPUTS
3
OC WITH +3.3V PULL UP
[24V, 0.2A MAX]
6 81 2 4 5 7
0-24V DC ANALOG
OR CLOSURE
31 2 4
12V DC
.1A OUT
RS232
RX
WTTX
CH1
CH2
AMP OUT
LAN [THRU]
LAN [POE]
24V DC/3.7A
24V DC/1.9A
OUT
IN
POWER
4
2
1
3
5
12
67
8
91011
1. External Power Input 24V DC 3.7 A – Auxiliary power, 24V DC, 3.7 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 1.9 A - Auxiliary power, 24V DC, 1.9 A 2-pin Euro connector.
3. LAN [PoE] – RJ-45 connector, 802.3at Type 2 power, Q-LAN.
4. LAN [THRU] – RJ-45 connector, Ethernet daisy-chaining.
5. Device Reset – Use a paperclip or similar tool to restore default network settings and recover factory default settings. Before
attempting a reset, refer to the Q-SYS Help for details.
6. RS232 – COM: TX pin (output, transmit data), RX pin (input, receive data), Ground pin (signal ground), WT pin (5.5V DC 70 mA max).
7. AMP Out – 2 channels, 5W per channel (PoE+) or 9W per channel (Aux power).
8. Signal Ground – For use with General Purpose Inputs and Outputs (GPIO). Uses connector pin 14 (not numbered).
9. GPIO Outputs – 8 outputs, open collector (24V, 0.2A sink maximum) with pull up to +3.3V (pins labeled 1–8 equal pins 1–8 in the
Q-SYS Designer GPIO Output component).
10. GPIO Inputs – 4 inputs, 0-24V analog input, digital input, or contact closure (pins labeled 1–4 equal pins 1–4 in the Q-SYS Designer
GPIO Input component). Configurable pull-up to +12V.
11 . 12V DC .1A Out – For use with GPIO. Uses connector pin 1 (not numbered).
12. FLEX Channels – 4 user-configurable audio channels (mic/line input with optional phantom power, or line output), balanced or
unbalanced.
Bekijk gratis de handleiding van QSC QIO-AES8x8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | QIO-AES8x8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2811 MB |
