QSC QIO-AES8x8 handleiding
Handleiding
Je bekijkt pagina 16 van 26
16
QIO-TEL2 Front Panel
POWER
ID
QIO-TEL2
PERIPHERAL
1
2
3
1. Power LED – Illuminates blue when the Q-SYS QIO-TEL2 is powered on.
2. ID LED – LED blinks green when placed into ID Mode via ID Button or Q-SYS Configurator.
3. ID Button – Locates the QIO-TEL2 in Q-SYS Designer Software and Q-SYS Configurator.
QIO-TEL2 Rear Panel
4
2
1
3
5
6
1. External Power Input 24V DC 2.5 A – Auxiliary power, 24V DC, 2.5 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 2.5 A - Auxiliary power, 24V DC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] – RJ-45 connector, 802.3af Type 1 Class 1 power, Q-LAN.
4. LAN [THRU] – RJ-45 connector, Ethernet daisy-chaining.
5. Device Reset – Use a paperclip or similar tool to restore default network settings and recover factory default settings. Before
attempting a reset, refer to the Q-SYS Help for details.
6. POTS Lines – Two FXO interfaces. Note: Each Q-SYS phone line is meant to be connected to a single PTSN line (FXO). It does not
control a multi-line PBX or interface with an FXS.
Bekijk gratis de handleiding van QSC QIO-AES8x8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | QSC |
| Model | QIO-AES8x8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2811 MB |
