Handleiding
Je bekijkt pagina 47 van 92
47
4
Press the MODE button, after this the day of the week will start ashing on the display. This can be conrmed with the button.
Then the hour digits will start ashing, which can also be conrmed with the
, and the same will happen with the minutes.
This will cause the rst day of the week to appear on the display. If it is desired to start this day program, this can be conrmed with the
button. Using the arrow keys, the desired day can be selected and this can be conrmed when the correct day has been selected.
Programming starts at 0h, using the arrow keys to choose between comfort temperature (two dashes), eco-temperature (one dash) or
frost protection (no dashes). This can be conrmed with the
key, and this will be the same for every hour until the 24h is reached.
When conrmed with the key, the second day of the week will appear on the display.
This process can be repeated for day 2, or it can be chosen to select another day where a program is to be set.
The program of one day can be copied to another day: the copy function can be selected by pressing the PROG key until ""COPY"" ap-
pears on the screen (further explanation is given below).
conrm completion of programming with
then exit by pressing the MODE button.
COPY FUNCTION
As mentioned earlier, this function allows copying a previously programmed day to another day.
Start from the beginning: turn on the thermostat and press PROG a few times until the word ""COPY"" appears on the screen. This is the
sequence:
When ""COPY"" appears on the screen, the day can be selected with the arrow keys whose program is to be copied. To conrm, press the
button.
After this, the word ""to"" appears on the screen. Using the arrow keys, the number of the day can be selected which to copy. To con-
rm, press the button again.
KEY LOCK FUNCTION
This feature comes in handy to prevent unintended interventions on the thermostat or to limit its use.
To lock the thermostat, press both the MODE key and the up arrow key for a few seconds until a small lock icon appears on the screen.
To unlock the thermostat, follow the same steps.
OPEN WINDOW FUNCTION
The appliance has a built-in sensor that detects a sudden drop in temperature.
This function is activated when the temperature in the room drops by 3ºC in 5 minutes, the appliance will then switch off automatically.
This function remains active until the temperature stabilises, after that it will also switch back on automatically.
When this function is activated, a small window icon appears on the screen.
INSTALLATION OF THE WI-FI MODE FOR WIRELESS MANAGEMENT
The appliance can be regulated by using a smartphone app. The app communicates the appliance via the internet using the home router.
WIRELESS OPERATION (ONLY AVAILABLE ON SMART MODELS)
BASIC RF FEATURES
Parameter Description
Working frequency 2.400 to 2.4835 GHz
Conducted power 13 dBm to 23 dBm
Wireless standard IEEE 802.11b/g/n (channels 1 to 14)
Data transmission rate 11b: 1, 2, 5.5, 11 (Mbps)
11g: 6, 9, 12, 18, 24, 36, 48, 54 (mbps)
11n: HT20 MC S 0 to 7
Antenna type PCB antenna with a peak gain of 2.54 dBi
1. Enable bluetooth and WiFi on your phone or tablet. Use your phone to scan the QR code
1
or search “Smart life” in Google play or
App store to download and install the app.
2. Open the app and sign in.
3. Scan the QR code
2
in the app in the top right corner to add a heater. Press the "ECO" button for 3 seconds to activate the Wi-Fi
matching process.
4. Follow the instructions in the app.
1
2
Bekijk gratis de handleiding van Qlima EPIH 5120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Qlima |
| Model | EPIH 5120 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 10319 MB |
