Handleiding
Je bekijkt pagina 46 van 92
46
4
DISPLAY CONTROL INSTRUCTIONS
1
2
7
8
9
4
10
5
3
6
1. Temperature working mode icons : comfort, eco or frost protection
2. Keys locked for safety reasons
3. Working mode
4. Temperature setting program
5. Day setting program
6. Time setting program
7. Heating Icon
8. Open window detector is activated
9. WI-FI signal
10. Set temperature
SELECT WORKING MODES
EPIH appliances have two working modes, press the MODE button (at the left side frame of the thermostat panel) to change the working mode.
At rst, check that the thermostat is turned on.
When the MODE button is pressed, the display will show two options:
1. AUTO mode By selecting this mode, the set temperature automatically varies from a predened setting based on 3 tempera-
tures (comfort, eco or frost protection). Bars on the display indicate hourly and daily temperature programming.
2. Manual. By choosing this mode, the setting temperature van be selected and will not change unless wanted.
SELECT MANUAL MODE
By pressing the MODE key, the automatic mode can be changed to manual mode. Press the button of manual, then this icon will appear
on the screen: .
By using the arrow keys , the desired comfort temperature can be selected.
When the manual mode is set, the economy mode can be activated by pressing the ECO button
The temperature in ECO mode can also be adjusted by using the arrow buttons
SELECT AUTOMATIC MODE
Press the MODE button to activate automatic mode. This icon will appear on the display .
The programming settings should be installed as follows:
SETTING THE DATE AND TIME
Press and release PROG button key. The day of the week will blink on screen. In the example the number 4 appears, what means that the
day four (thursday) is on screen.
By pressing arrow keys moving forward or backward the number from the day of the week can be selected. We press key to conrm.
Once the day of the week is conrmed, the hour digits start to ash. These can be changed by pressing the arrow buttons and then conrmed
with the button.
Once the hour digits are conrmed, the minute digits start ashing. These can also be changed by pressing the arrow buttons and then con-
rmed with the button.
When this is installed, it switches directly to weekly and daily programming.
If programming is not necessarily required, the MODE button can be pressed twice to avoid it.
SETTING THE DAILY PROGRAM
There are three different operating temperatures that can be set in the daily programm. These can be assigned to each hour.
Each hour, the following three options can be chosen from:
• Comfort temperature, a sun icon appears on the display. This is selected as the desired room temperature.
• Economy temperature, the moon icon will appear on the screen. This is often used at night or during short absences. This
working temperature is always 3 degrees lower than the comfort temperature.
• Frost protection, the ice icon will appear on the screen. This is the standby temperature, this prevents the room temperature
from falling below 7 degrees.
Once setting the date and time is complete, the appliance can be further installed. After setting the time and date and then deciding to go out, the
following steps should be followed:
Bekijk gratis de handleiding van Qlima EPIH 5120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Qlima |
| Model | EPIH 5120 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 10319 MB |
