Handleiding
Je bekijkt pagina 24 van 28
24
•
EN
7
Cleaning and Maintenance
We recommend a frequent cleaning of the speaker system. Disconnect the device from power before
cleaning. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
If the speaker system distorts, one of the loudspeakers may be defective. In this case the PA system should
not be operated any more in order to prevent further damage. Please contact your dealer. If clacking sounds
are heard from the speaker system, screws may have loosened due to the continuous vibrations. The
speaker system should be checked by a specialist.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers. Should you need any spare parts, please use genuine parts. If the power supply
cable of this device becomes damaged, it has to be replaced by a special power supply cable available at
your dealer. Should you have further questions, please contact your dealer.
Replacing the fuse (model KX-181A)
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating. Before
replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
Bekijk gratis de handleiding van PSSO KX-P212A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PSSO |
| Model | KX-P212A |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 4406 MB |
