Protector AS-7040 handleiding
Handleiding
Je bekijkt pagina 39 van 92
00
DE
The exhaust air control is now installed and functional.
When operating the system please note that the
window and roller shutter sensors have transferred their
status to the central unit if they flash green twice after
approx. 5 seconds. If the relevant sensor flashes red
twice then the status was not transferred sufficiently
and is sent in cycles again every 50 seconds until the
status is accepted and confirmed as described above.
For the stove sensor the status is requested every
180 seconds. If the status of the stove sensor changes
then it is updated to the central unit in accordance with
the routine described above.
The central unit decides on the release of the
relays depending on the status of the taught-in
transmitters.
System function test
(Example AS-7020/30/40 and AS-F20
window transmitter)
• Switch the exhaust device on and open the window.
The green LED flashes briefly and the green LED on the
receiver is now on constantly. The exhaust device is
switched on.
• Close the window and the exhaust device will switch
off. The red LED on the transmitter flashes and the red
LED on the receiver is now on constantly. The exhaust
device is switched off.
• Your system is ready for operation once this function
test has been completed. Repeat this function test at
regular intervals for your own safety.
EN
39
Bekijk gratis de handleiding van Protector AS-7040, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Protector |
| Model | AS-7040 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8838 MB |
