Proline 66471 handleiding
Handleiding
Je bekijkt pagina 4 van 76
4
maximum working pressure. The appropriate choice of the tool for appropriate air flow. In case of excessive supply air pressure, use the
a given task will ensure more efficient and safer work.
pressure regulator with a safety valve.
Before you start any adjustment, accessory replacement or
It is prohibited to supply pneumatic tools directly from the
storage of the tool, disconnect the power cord to avoid
compressor. The pneumatic tool should be supplied via the
inadvertent switching on of the pneumatic tool.
water filter and lubricator system. This will ensure clean air
lubricated with oil.
Keep the tools out of reach of children. Do not let any persons
not having the appropriate training operate the tool.
The filter and lubricator condition should be checked before
Pneumatic tools operated by users lacking proper training are
every use. Whenever required, the filter should be cleaned
dangerous.
and the oil in the lubricator filled up. This will ensure proper
Ensure appropriate maintenance of the tool. Check the tool
operation of the tool and extend its lifecycle.
for any maladjusted and loose moving parts. Check if no tool
The socket wrenches and other inserted tools must be
component is damaged. When you detect any defects,
designed for operation with pneumatic ones. The attached
remove them before you use the pneumatic tool. Many
inserted tools must be in working order, clean and free from damage
accidents are caused by incorrect tool maintenance.
and their size must match the drive size. It is prohibited to modify the
Always use pneumatic tools and accessories in line with these
wrench sockets or drive. Use only impact sockets.
instructions. Use the tools in line with their designation,
When operating the impact wrench, always use the required
considering the type and conditions of work. Using the tools for
protective measures, including but not limited to noise-
any work other than they were designed for increases the risk of
protecting ear-muffs, safety goggles, work gloves and hair
dangerous situations.
net.
When you work, always consider the work tool may break
Adopt the appropriate posture to respond to the standard or
which may result in fragments thrown at high speed and
unexpected movement of the tool caused by the torque. Any
cause serious injuries.
vibrations, pulls and incorrect posture may damage your arm or hands.
Ensure the tool rotates in the appropriate direction.
Stop working when you feel tired or experience pain.
Unexpected rotation direction may cause dangerous situations.
Check the technical condition of the device. Before you start
Do not bring your hands close to moving components of the
working, check the technical condition of the tool components subject
pneumatic tool as this may cause injuries.
to ordinary wear and tear to ensure their correct operation. Check if the
If the ring securing the drive is damaged, the tool and
moving components do not hit or jam. Check if all the components are
mounted correctly, if there are no visible cracks.
fragments may be thrown at high speed. This may cause serious
injuries.
If you notice any leaks or other irregularities, detach the
The torque may rotate the tool. This may cause serious
impact wrench from the compressed air source and remove
injuries if any body parts get into the range of the rotated
the irregularity cause. Every damaged component should be
tool. Always assume the appropriate posture when working and be
repaired or replaced carefully by the specialist. Do not use the device
prepared for the tool rotation.
with a malfunctioning power switch.
When you replace the work socket, the compressed air supply
Use only equipment designed for operation with pneumatic
should be closed to avoid its ejection during the accidental
tools. Using inappropriate equipment may cause serious injuries.
tool start.
If your tool loses power suddenly, release the tool switch
Do not leave the impact wrench on when you do not operate
immediately.
it. Hazard of injuries caused by detached parts.
Repair and maintenance
Protect the tool from falls and impact, as well as from
The tool should be repaired solely by authorised companies,
contamination e.g. by mud, water, sand etc. Maintain the
using only original spare parts. This will ensure proper safety of the
tool in line with the operation manual and ensure good
pneumatic tool operation.
condition of hoses supplying compressed air.
Do not clean the pneumatic tool with petrol, solvent or any
The worn device should be disposed of in accordance with the
other flammable liquid. The vapours may ignite, causing the tool
applicable regulations.
explosion and serious injuries.
DEVICE DESIGNATION AND DESCRIPTION:
Always use high-quality products for the tool maintenance. It
The pneumatic impact wrench is a handy tool, powered by a compressed
is prohibited to use any products other than those mentioned
air stream under the appropriate pressure. It is designed for tightening
in the operation manual.
and loosening threaded connections (max. M16) using replaceable
SPECIAL SAFETY TIPS FOR USING THE PNEUMATIC
impact sockets 1/2" inserted on the drive. Using the wrench for bolts
IMPACT WRENCH:
with the diameter exceeding the one mentioned above may damage the
The user shall be obliged to ensure correct operation of the
impact mechanism.
impact wrench. The source of energy for the impact wrench may be
It is permitted to use the appropriate adapters, universal connectors and
solely compressed air connected by means of the air inlet connector.
adapters between the drive at the impact wrench outlet and the square
socket port.
Always ensure the compressed air source enables to
generate the required working pressure and provide the
The wrench enables to adjust the torque and set the rotation direction
b)
c)
c)
d)
e)
e)
f)
g)
g)
h)
h)
i)
i)
j)
j)
k)
l)
k)
:
l)
a)
b)
m)
c)
a)
b)
d)
f)
n
Bekijk gratis de handleiding van Proline 66471, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proline |
| Model | 66471 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16510 MB |
