Proline 46815 handleiding

Niet gecategoriseerd

Proline

60 pagina's

PDF beschikbaar

Handleiding

WARNING:

Before you start using your hydraulic bottle jack, read thoroughly this instruction manual. Failure to follow the instructions can result

in serious risks to the user (risk of injury) and/or damage to surrounding objects. Keep this manual for future reference. Do not

introduce any technical changes in jack construction as it may result in loss of its technical parameters and safety features.

THE SET INCLUDES:

źHydraulic jack – 1 piece

źLever (2-part: 46802, 46803, 46805; 3-part: 46808, 46810, 46812, 46815, 46820) – 1 piece

COMPONENTS (NUMBERS):

The numbers of jack components refer to the drawings presented on pages 2-3 of this instruction manual:

1. Release valve

2. Base

3. Safety valve

4. Piston

5. Oil reservoir

6. Pump

SAFETY GUIDELINES:

1. The jack can be used only by adults who have read its user's manual. Keep any unauthorized persons away when the jack is in use. Do not use hydraulic

jacks for lifting persons.

2. Be careful, control your steps and use your common sense when operating the jack. Do not use it when your are exhausted or under the influence of

drugs, alcohol or other psychoactive substances. A moment of inattention can result in a serious risk to user's health.

3. Use the jack in a spacious and well-lit place.

4. Use personal protective equipment (protective gloves for protection against oil, safety glasses to protect the eyes against dust).

5. Keep away animals and children when you operate the jack.

6. The operator should remain in a stable position standing with the face towards the jack and vehicle, to keep watching the situation (vehicle and jack)

during lifting. If you notice any problems, tilts, jack dislocations, jack saddle lowering (9), etc., lower the vehicle immediately, check the jack, the

position of your vehicle, make sure that the ground is flat/level and the vehicle is properly immobilized, etc. to meet all the requirements listed in the

manual. Then you can restart lifting the vehicle.

7. The jack is designed to lift two-trace vehicles only (the term “vehicle” in this manual means a “two-trace vehicle”, so it should be used only in such

applications). The jack cannot be used to support vehicles. To support vehicles use special fixed supports. The jack cannot be used to lift other vehicles

e.g. “non-two-trace” ones.

8. Before you start lifting, check the jack technical condition. Check whether the jack is not damaged/cracked. If any component is damaged or cracked,

do not use it as it may result in losing its technical parameters and can be dangerous to its user.

9. Do not overload the jack by lifting vehicles with a weight exceeding its maximum capacity.

10. The jack is designed to lift on firm, flat and level surfaces. Make sure that the surface can bear the load of a lifted vehicle. Failure to follow this notice can

result in making a hole, sinking and/or bending the ground. It is possible to spread the load on a larger surface by using appropriate wooden blocks.

Using the jack on non-compliant surfaces can result in collapsing, uncontrollable lowering of lifted vehicle and can be dangerous to the health and life

of people working in the vicinity of vehicle and reduces its lifting capacity.

11. Before you start lifting your vehicle, make sure that its handbrake is engaged and two wheels on the opposite of the side we would like to lift are

secured by using chocks/wedges to protect the car against unexpected movements.

12. Do not simultaneously use two or more jacks to lift the same vehicle.

13. The saddle (9) of the jack should be precisely placed under one of the chassis points designed by the manufacturer to lift the vehicle to provide full

stability and should be set centrally on the seat without sliding (before you start lifting, read the user's manual of your vehicle). The jack cannot be used

to lift vehicles not equipped with special lifting points.

14. Lifted vehicles should be secured with fixed supports to protect them in the case of uncontrolled sudden lowering of the seat (9), as it may result in a

damage to the vehicle , injury to the user and/or other persons remaining in the vicinity. Do not enter the vehicle when it is lifted and unsecured with

fixed supports.

15. Never leave your lifted vehicle unattended.

16. Safety valve (3) on the jack (marked with the phrase «DO NOT ADJUST»), has been factory adjusted and does not require any user's intervention. The

user mustn't adjust the safety valve.

7. Lever

8. Lever sleeve

9. Saddle

10. Oil cap (for filling)

11. Extension screw

12. Carrying handle (refers only to jacks 46812, 46815, 46820)

ź manual – 1 pieceInstruction

źWarranty card – 1 piece

Instruction manual for hydraulic bottle jack:

46802, 46803, 46805, 46808, 46810, 46812, 46815, 46820

Original text translation

Bekijk gratis de handleiding van Proline 46815, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.