Proficare PC-BS 3133 handleiding
Handleiding
Je bekijkt pagina 10 van 46
PC-BS3133_IM_10.2024 24.10.24
10
Maintenance
Pull the mains plug out of the socket before cleaning or
maintaining the appliance.
Emptying the Dust Container
1. Pull the mains plug out of the socket.
2. If necessary, detach the suction tube or nozzle attach-
ment from the appliance.
3. Hold the appliance with the base plate of the dust con-
tainer over a dustbin.
4. Empty the contents of the dust container. To do this,
press the button (8) to open the base plate.
5. Close the base plate again. The lock on the dust con-
tainer must engage.
The Filter System
Your appliance has 3 filters. The conventional dust bag sys-
tem has been replaced by a transparent dust container. In it,
coarse dirt and the smallest suspended particles are whirled
out of the “suction air” by the high flow speed.
There is no need to buy dust bags.
The filters must be cleaned regularly.
CAUTION:
• Never wash the filters in the washing machine.
• Do not use a hair dryer to dry them.
• Only put the appliance back into operation when all
filters are completely dry and correctly fitted.
The Filter Unit
The filter unit is composed of:
• HEPA filter
• Coarse filter
To clean the filter unit, proceed as follows:
1. Empty the dust container as previously described.
2. Dismantling the filter unit
2.1 Turn the coarse filter counter-clockwise from the
guide rails. Pull the coarse filter from the dust collec-
tor.
2.2 Turn the HEPA filter counter-clockwise from the
guide rails. Pull the HEPA filter from the dust collec-
tor.
3. You can brush out the HEPA filter. For heavier soiling,
clean the lters under running water.
4. Let the filters air dry completely before reinserting them!
5. You can wipe out the dust container with a damp cloth.
Dry it afterwards.
- Discolouration / matting of the dust container due to
use is normal and does not constitute a defect.
6. Assembly of the filter unit
Refer to the adjacent figure.
6.1 Set the HEPA filter with its
3 guides to the inner circle.
Tighten the filter clockwise.
6.2 Set the coarse filter over the
HEPA filter with its 3 guides
in the outer circle. Tighten
the coarse filter clockwise.
- If the filters are not inserted, dirt will get into the
motor. This can damage the motor.
7. Close the bottom plate.
Outlet Filter
Your appliance also has an outlet filter. The filter cover is
located on the back of the appliance.
1. Unscrew the cover (2) anti-clockwise.
2. Remove the filter fleece and wash it out.
3. Allow the filter fleece to dry completely in the air before
reinserting it into the appliance.
4. Replace the cover over the filter.
5. Close the outlet filter with the cover.
Cleaning
WARNING:
• Pull the mains plug out of the socket before cleaning
or maintaining the appliance.
• Never immerse the appliance in water to clean it. It
could cause an electric shock or re.
CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use harsh or abrasive cleaners.
• Clean the housing with a soft, dry cloth without any
additives.
• For cleaning the filters, please read the chapter
“ Maintenance”.
Storage
• Clean the appliance as described. Allow the accessories
to dry completely.
• Use the previously mounted wall bracket for storage.
• We recommend storing the appliance in its original
packaging if you do not intend to use it for a longer
period of time.
• Always store the appliance out of the reach of children in
a well-ventilated and dry place.
Bekijk gratis de handleiding van Proficare PC-BS 3133, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proficare |
| Model | PC-BS 3133 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6259 MB |
