Proel AE604 handleiding
Handleiding
Je bekijkt pagina 11 van 48
11
For the connection of audio sources with unbalanced output, connect the positive to terminal 1 (or 4), and the source ground to terminal 2 (or
5). Leave negative input unconnected.
BGM 1 audio input 1 – Audio P
2 – Common/Ground
3 – Audio N
Balanced line input, transformer insulated. Used for background music playback.
Power levels: 0.8Vrms @ 0dB, Ri=100Kohm
Use shielded cable for Audio signal with min section 0.5 mm
BGM 2 audio input
4 – Audio P
5 – Common/Ground
6 – Audio N
Balanced line input, transformer insulated. Used for background music playback.
Power levels: 0.8Vrms @ 0dB, Ri=100Kohm
Use shielded cable for Audio signal with min section 0.5 mm
4.m Emergency microphone callstation
The system has a RJ45 input for connection to remote emergency microphone workstations and monitored according to Standard EN54-16.
Connect the microphone workstation to socket RJ45 through a UTP CAT5 cable. The connection between the two RJ45 pins to the cable end
must be 1-to-1.
The AE604 is designed to be connected to the Proel’s DBExx series microphone stations.
External emergency mic
workstation port
1 – Audio P
2 – Audio Gnd
RJ45 Connector for connection to external emergency microphone workstation. This
connector carries both the audio signals and data link from and to the external
microphone workstation. Connection is monitored and the system reports a fault in case
CAT5
headed RJ45
Bekijk gratis de handleiding van Proel AE604, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proel |
| Model | AE604 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
