Prixton P125 handleiding
Handleiding
Je bekijkt pagina 23 van 108
Adjusting the thread tension
The thread tension should be adjusted for different fabrics. The required tension
depends on the weight and thickness of the fabric.
Turn the thread tension adjustment wheel to adjust the tension of the upper thread:
To increase the tension, turn the thread tension adjustment wheel to a higher number.
To reduce the tension, turn the thread tension adjustment wheel to a lower number.
lnserting the bobbin
1. Turn the hand wheel anti-clockwise to raise the needle to the highest point.
2. Slide the bobbin cover to remove it.
1. Normal thread tension
2. Upper thread tension too loose
3. Upper thread tension too tight
3. Place a bobbin in its chamber with
its thread going clockwise. Pull the thread towards the back so there is at least
10 cm of loose thread.
4. Hold the end of the upper thread and turn the hand wheel anti-clockwise with the
other hand until the needle is raised again.
5. Pull on the upper thread to draw up the bobbin thread through the stitch hole of the
presser foot.
6. Refit the bobbin cover. Pull out approximately 10 cm of both threads and lay them to
the back under the presser foot.
Bekijk gratis de handleiding van Prixton P125, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | P125 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16294 MB |
