Prixton P125 handleiding
Handleiding
Je bekijkt pagina 22 van 108
Using the needle threader
1. lnsert the needle threader through the eye of the needle from the back to the front.
2. Pass the thread through the wire loop of the needle threader.
3. Pull the needle threader together with the thread back through the eye.
Sewing setup
CAUTION
Risk of injury! Risk of damage!
Unplug the appliance when making any adjustment in the needle area, such
as threading needle, changing needle, threading bobbin, or changing presser foot.
Threading the upper thread
Open the head cover, Put the bobbin
clockwise on the spool pin, show in Fig1.
Pass the thread of the bobbin through the
hole of winding slice from back to front,
show in Fig 2.
Pull the thread clamp and place the thread
from top to bottom into the clamping piece,
then release, show in Fig3.
Wrap the thread from the bottom into the
casing marked 3 and then up, show in Fig 4.
Pass the thread from left to right through
the pull rod hole, show in Fig 5.
Pass the thread through the ring, show in
Fig 6.
Pass the thread through the needle clamp,
show in Fig 7.
Wind the thread end to the needle eye,
show in Fig 8.
Place the bottom thread in clockwise
direction, show in the figure.
NOTICE
Make sure the thread passes through the
thread clamp. When througt the upper
thread tension adjustment wheel , poke the
thread clamp slightly to make sure there is
no thread jamming.
It is strictly required to follow the above
steps during threading.
1
2
3
4
5 6
7
8
9
4
3
1
2
5
6
Bekijk gratis de handleiding van Prixton P125, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | P125 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16294 MB |
