Prixton KR250 handleiding
Handleiding
Je bekijkt pagina 18 van 64
Analysis of common problems
Phenomenons
Causes
Solutions
The machine suddenly stops
working during use.
It may be that the machine runs too
long, or the ambient temperature is
too high, resulting in the machine's
motor temperature being too high;
the machine starts the overheating
protection program, automatic
shutdown.
Gear reset to "0", unplug the power,
wait for the machine to return to
room temperature can be restarted
(generally need 15-30 minutes, the
room temperature varies cooling
time).
Turning the gear knob machine
does not run.
Excessive noise when the machine
is running.
The machine speed drops, or the
speed is unstable.
① Whether the room temperature
is low, causing the lubricant in the
machine to harden.
②The ingredients stirred are too
hard and too much, resulting in too
much load on the machine.
③Whether the voltage suddenly
becomes low.
①Remove the mixing bowl and let
the machine idle for 5 minutes to
soften the lubricant in the machine
and restore the speed stability.
②Reduce the mixing volume and
let the machine work according to
the normal workload.
③When the voltage is stable, use
the machine again.
① Choose the right gear to stir food
according to the recommendations
in the manual
② Reduce the amount of stirring.
③If the voltage is unstable, wait for
the voltage to stabilize before
using.
④If the working time is too long,
stop and cool down for a while
before using.
①The machine will work louder in
high gear than in low gear.
②The amount of food stirred is too
large, resulting in overloading the
machine.
③Voltage is unstable.
④Working time is too long.
Machine swaying and shaking
when working
The headstock can't spring back to
reset after putting on the anti-splash
cover and mixing bowl
Dough darkening found after use
Black powder falls onto the
dough at the mixing head.
Please check that the mixing head
and hook are dry and that no water
or dust is present on the surface
before use.
Rotate the anti-splash cover and
assemble it in place, and assemble
the mixing pot in place.
Check that the anti-splash cover is
in place and the mixing bowl is
assembled.
①Check if the foot pad on the base
is off.
②Whether the machine is placed on
a smooth and flat countertop for use.
Check if the rise button spring back
in place.
Check if the power is out.
Check if the plug is in good contact
with the socket.
Verify that the power plug is
plugged into the outlet.
Wait for power before operating
Make sure the headstock is stuck in
place.
①Check if the foot pad on the base
is off.
②Place on a smooth and flat
countertop for use
18
Bekijk gratis de handleiding van Prixton KR250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | KR250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6970 MB |
