Handleiding
Je bekijkt pagina 9 van 32
SAC51
3. Timer/Wi
5. Appliance mode
6. On/Off switch
7. Hot air outlet grille
3. Handle
Display description:
1. Control panel
1. Sleep
2. Air outlet with adjustable louvre
6. Bottom drainage opening
4. Air inlet with air lter
5. Wheels
Diagram 3
2. Lock
Device description.
4. Fan speed indicator
Diagram 1
The air conditioner requires air to be vented to the outside of the room being cooled. Connect the exhaust
air pipe to the air conditioner, direct the other end to the outside through a tilt window or to a ventilation
grille prepared for this purpose. Take care to keep the outlet pipe as short as possible. Note that the
discharge pipe heats up and the heat will stay in the room. If necessary, use a longer heat removal pipe. It is
advisable to use insulation such as cladding the pipe with wool or polystyrene.
PREPARING THE APPLIANCE FOR OPERATION
The air conditioner does not normally require installing a condensate drainage pipe. In very high humidity
conditions, or if you want to dehumidify the air in the room, this solution may be recommended. The water
should be discharged using a hose to a drain to the sewage system. The water will be heavily demineralised
and is not suitable for drinking or watering plants.
Place the air conditioner in a location where the air ow will not be blocked. Leave at least 50 cm of free
space around the air conditioner. Pay particular attention to curtains and other textiles so that they do not
restrict the airow. Do not place the air conditioner near heat sources, in direct sunlight, in places subject to
vibration and shock, in dusty rooms, inside pieces of furniture that could restrict air ow and on uneven
surfaces.
Install an air discharge pipe. Connect the tube to the connector. At the other end, screw the xing to the
window seal.
Control panel description
Diagram 2
1.1. On/Off button on the POWER unit.
1.2. MODE button for operation between ventilation, cooling
and dehumidication.
1.3. SPEED button.
1.6. Sleep mode on/off buton.
1.8. Decrease the desired temperature or timer setting.
1.4. Timer/Wi settings.
1.5. Unit lock buton.
1.7. Increase desired temperature (16°C〜32°C) or timer setting.
Place the discharge pipe in the window, then stretch it so that it reaches the air conditioner. Avoid kinks and
angles on the pipe. Reduction in airow will result in a decrease in the unit's performance.
9
Bekijk gratis de handleiding van Prime3 SAC51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prime3 |
| Model | SAC51 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3992 MB |