Prime3 SAC51 handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 32
SAC51
4. To set the air ow direction you must manually adjust it.
5. Set the expected temperature using the up and down arrow keys (1.7, 1.8).
7. Timer function:
Activating the TIMER mode when the unit is switched off sets the number of hours after which the unit
will switch on.
Activating the TIMER mode when the unit is switched on sets the number of hours after which the unit
will switch off.
The timer is set using the up and down arrow keys (1.7, 1.8) after pressing the timer button (1.4).
When the TIMER function is set, the unit will enter the off/on timer mode. In this mode, the air conditioner
will operate according to the selected setting.
To switch the timer off, set the timer value to 00 or press the POWER switch (1.1).
11. You can connect a condensate drainage pipe. It should be connected to the upper drain hole. Ensure that
the pipe slopes steadily towards the external vessel or drain grille.
6. The blowing force can be changed by pressing the SPEED blowing control button (1.3).
DEVICE OPERATION
9. NOTE: the air conditioner has an automatic defrost function. If the automatic defrost mode is activated,
the fan will run and the power on indicator will ash. Once the defrosting process is complete, the air
conditioner will resume operation.
2. Switch on the air conditioner using the POWER switch (1.1)
10. If the condensate drip tray overows, the unit will stop operation. Disconnect the air conditioner from
the power supply and then place a vessel under the water drain. Remove the plug and wait for the water
to drain. Then plug the drain hole again. Do not tilt the air conditioner during this operation as water may
spill out of the drip tray.
8. Night mode function:
When this mode is activated, the air conditioner raises the target temperature by one degree after 1 hour,
and by another degree after the next.
3. Select the operating mode between cooling, dehumidication, fan by pressing the MODE selection
button (1.2).
1. Connect the appliance to the power source.
10

Bekijk gratis de handleiding van Prime3 SAC51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPrime3
ModelSAC51
CategorieAirco
TaalNederlands
Grootte3992 MB