PreSonus UC Surface handleiding

75 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 75
9
2 Mix Controls
2.4 Mix Detail
UC Surface
Reference Manual
Power User Tip: A high-pass lter attenuates all frequencies below the set threshold.
Use the Fat Channel high-pass lter to remove unwanted low frequencies from your
source signal, rather than trying to EQ them out
2.4.2 Subgroup Mix Detail
2
1
7
8
5
4
6
3
1. Mix Settings. Opens Mix Settings view. See Section 2.5 for details.
2. Mix Name. Click or tap on the default name to open
a text eld to customize the mix name.
3. Stereo Link. Click or tap to create a stereo subgroup with the adjacent FlexMix.
4. Subgroup Edit. Click or tap to add or remove channels from the subgroup.
5. Bus Type (Series III and RM-series mixers only). StudioLive
Series III and AI-series RM/RML mixers’ feature FlexMixes that
can be congured as aux mixes, subgroups, or matrix mixes
(Series III only). Use these buttons to select the bus type.
6. Output Delay (StudioLive Series III only). Sets the alignment
delay for the current FlexMix. For more information on using output
delays, please review the StudioLive Series III Owners Manual.
7. Route to Main. Click or tap to route the subgroup to the Main bus.
StudioLive 64S users will also nd a Mono assign for the Mono/Center bus.
8. High-Pass Filter. Sets the High-Pass Filter Frequency Threshold for the Selected
Channel or Output Bus. The lters threshold can be set from 24 Hz to 1 kHz.
When the meter is set to its lowest point, the lter is o. The high-pass lter is
available on all input channels and on auxiliary and FX output buses only.
Power User Tip: A high-pass lter attenuates all frequencies below the set threshold.
Use the Fat Channel high-pass lter to remove unwanted low frequencies from your
source signal, rather than trying to EQ them out
When a FlexMix subgroup is selected, you will nd the Edit button in the Mix Detail
area of the Fat Channel. Clicking this button will allow you to route input channels to
this subgroup.
Click on the channels you would like assigned to the subgroup. The channel will

Bekijk gratis de handleiding van PreSonus UC Surface, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPreSonus
ModelUC Surface
CategorieNiet gecategoriseerd
TaalNederlands
Grootte14432 MB