PreSonus UC Surface handleiding
Handleiding
Je bekijkt pagina 11 van 75
8
2 Mix Controls
2.4 Mix Detail
UC Surface
Reference Manual
When a mix is selected, the following controls will be
available at the far left of the Fat Channel:
2
1
7
5
3
4
6
1. Mix Settings. Opens Mix Settings View. See Section 2.5 for details.
2. Mix Name. To give each mix a custom name, simply
click on the default name to open a text eld.
3. Stereo Link. Creates a stereo bus with the adjacent FlexMix.
4. Aux Send Position. By default, all aux buses are set to Pre 1. This places the
send of every input channel to each aux bus before the fader, limiter, EQ,
and compressor, but after the Polarity switch, high-pass lter, and gate.
The four internal eects buses are set to Pre 2 by default, which routes each
of the input channels after all Fat Channel dynamics and EQ but prefader.
From this menu, you can choose between three
send positions for each Aux and FX mix:
• Pre 1: Sends each channel to the aux bus after the
polarity invert, high-pass lter, and gate.
• Pre 2: Sends each channel to the aux bus after all Fat
Channel processing (polarity invert, high-pass lter, gate,
compressor, EQ, and limiter) but before the fader.
• Post: Sends each channel to the aux bus after all Fat
Channel processing (polarity invert, high-pass lter, gate,
compressor, EQ, and limiter) and after the fader.
Power User Tip: Use the Pre 2 position for headphone and in-ear mixes to give
your performers a polished “studio” sound. This setting should be avoided for
oor wedges, as compression can cause feedback problems.
5. Bus Type (Series III and RM-series mixers only). StudioLive Series III and
AI-series RM/RML mixers’ feature FlexMixes that can be congured as aux mixes,
subgroups, or matrix mixes (Series III only). Use these buttons to select the bus
type. See Section 2.4.2 for information on routing channels to FlexMix subgroups.
6. Output Delay (StudioLive Series III only). Sets the alignment
delay for the current FlexMix. For more information on using output
delays, please review the StudioLive Series III Owners Manual.
7. High-Pass Filter. Sets the High-Pass Filter Frequency Threshold for the Selected
Channel or Output Bus. The lter’s threshold can be set from 24 Hz to 1 kHz.
When the meter is set to its lowest point, the lter is o. The high-pass lter is
available on all input channels and on auxiliary and FX output buses only.
Bekijk gratis de handleiding van PreSonus UC Surface, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | UC Surface |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14432 MB |
