PreSonus Quantum ES 4 handleiding
Handleiding
Je bekijkt pagina 66 van 97
62
13 The Settings Page
13.8 Aux Routing (StudioLive AI-Series Mixers)
Universal Control for StudioLive
®
Mixers
Software Reference Manual
13.7.7 AES
Selecting the AES tab allows you to route any mix pair to the AES output on your StudioLive mixer.
13.8 Aux Routing (StudioLive AI-Series Mixers)
In addition to the 32/24/16 input channels, the StudioLive AI-series mixers allow you to route a number of
other buses and other inputs. This is done via the Aux Router tab. To route these additional digital sends,
simply patch them to a stereo pair of auxiliary inputs of your choice. Remember, all of these buses and inputs
are automatically set to send their signals post-Fat Channel dynamics and post-EQ (where applicable). The
inputs and buses selected in the Auxiliary Input Router will be displayed in your recording application, along
with the name of their routing.
The Aux Router also allows you to designate a specific bus to the S/PDIF output and enables you to select
which stereo pair will be recorded on the auxiliary stereo track in Capture.
As previously mentioned, if Smaart Spectra tools are engaged, Universal Control will take control of the
second-to-last pair of auxiliary inputs. When Smaart has control, these inputs will be grayed out.
13.9 Smaart System Check Wizards (StudioLive AI-series only)
When connected to a StudioLive AI-series mixer, Universal Control includes three System Check Wizards
to provide you with the ability to view the frequency response of the venue; quickly calculate and set delay
system timing; and verify output connectivity.
Note: Smaart System Check Wizards are not available with StudioLive Series III consoles.
Traditionally, in professional sound reinforcement, the mixing console is there to mix, and the system
processor is there to align and tune the speaker system. When functioning and set correctly, the system
processor is invisible to everyone but the System Engineer. For the first time, the tools used to tune and align
speaker systems are built into the mixing console itself and accessible to any engineer who wants to improve
their PA’s sound and get the most out of their PA system.
For all but the most seasoned professional sound technician, this is a new extra step in the process of setting
up for a show. For most FOH engineers, getting a good mix is a big victory. But imagine being able to recreate
that same killer mix night after night, show after show. Once the system has also been optimized for the
environment it is in, any FOH engineer working on it will achieve that big victory without so much work. This is
why system alignment is a standard procedure in professional level sound reinforcement. Again, this solution
is not typically achieved from the mixing console, but built into the system design itself. The Smaart System
Check Wizards in Universal Control merge these two worlds.
Bekijk gratis de handleiding van PreSonus Quantum ES 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Quantum ES 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17151 MB |
