PreSonus Quantum ES 4 handleiding
Handleiding
Je bekijkt pagina 54 van 97
50
13 The Settings Page
13.2 System Settings
Universal Control for StudioLive
®
Mixers
Software Reference Manual
Sends. Aux Sends mode provides two display options. While on inputs, Universal Control will display
all the bus sends for the selected channel. While on outputs, Universal Control will display all the
channels for a selected bus as well as the bus master. Use the meter bridge to select a different
channel or bus.
Meter. Meter mode displays all the channel meters and mutes for every input channel and output bus.
2. Mute All. Mutes every input and output.
3. Sync Select. Syncs channel selection between the mixer and across all devices running Universal Control.
4. Sample Rate. Sets the sample rate for your mixer.
5. Cue Source. Sets the audio source for the cue mix.
6. Pan Mode. Sets the main bus output type as stereo L/R or as LCR (Left-Center-Right).
7. Global Aux Mute. Controls channel mutes per mix. Setting Global Aux Mute to “No” will allow you to mute
your channels per mix on RM-series mixers.
8. Peak Hold. Sets the type of metering. StudioLive mixers offer both Peak and Peak Hold metering. To view
the Peak Hold, simply enable this preference.
9. Phones Monitor. Sets source for the headphone output.
10. Solo Mode. Sets the solo behavior:
Latch. Multiple channels and buses can be soloed at the same time.
Radio. Only one channel or bus can be soloed at a time.
CR. Soloing any channel will patch the Solo bus to the Monitor bus.
11. Solo Level Control. Adjusts the overall level of the solo bus.
12. Solo PFL. Enables/disables PFL soloing.
13. Solo in Place. Enables/disables destructive solo.
14. Color Scheme. Luminosity presets to compensate for environmental light interference.
15. Show Edit Popup. Presents a large display of parameter value for each function.
16. Colorize Channels. Custom colors shad the entire channel, rather than just the channel label.
1 7. Channel ID. Choose between Icon only or Icon with channel number.
18. Show/Hide Auto Groups. Shows/hides Auto Filter DCAs. When categories are applied, Universal Control
automatically creates a Filter DCA group based on each category. To hide these groups, simply turn off
this preference.
13.2.3 StudioLive AI-Series console mixers
1. Device Display Mode. Selects the viewing mode for Universal Control:
1
2
3
4
5
6
13
12
11
10
7 8 9
Bekijk gratis de handleiding van PreSonus Quantum ES 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Quantum ES 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17151 MB |
