PreSonus Quantum ES 4 handleiding
Handleiding
Je bekijkt pagina 41 van 97
37
11 Projects and Scenes
11.1 Project and Scene Management (StudioLive Series III)
Universal Control for StudioLive
®
Mixers
Software Reference Manual
11 Projects and Scenes
Every parameter on your StudioLive mixer can be stored and recalled later. Global settings, like FlexMix
modes, Talkback assignments, and all the routing set in the Digital Patching menu in addition to System
settings like Sample Rate, Network Settings, and Cue Source are stored within Projects.
Because fundamental routing and bus structure is being changed when a Project is recalled, the load time
for Projects is slightly longer than loading a Scene or Preset. It is recommended that Projects are not loaded
during a performance or other live application.
All other mixer settings like Channel Strip parameters, Fat Channel models and settings, and Channel
Identifiers like name, color, and type are stored inside of Scenes.
Scenes that share the same Global System settings should be stored within the same Project. Many Scenes
can be stored within each Project but scenes created in one Project cannot be recalled in any other Project.
Note: Only StudioLive Series III mixers v. 2.0 firmware and higher offer this functionality. StudioLive AI-series
mixers employ a traditional Scene. See Section 11.2 for more information.
11.1 Project and Scene Management (StudioLive Series III)
To access your Project and Scene Libraries, press the ‘Prj’ button.
The controls on the left side of the screen save and load Projects as well as resets the default
routing of your mixer. The controls on the right side on the screen save and load Scenes within the
current Project, as well as resets the default state of every currently recallable parameter.
1. Project / Scene Manager Tab. Click / Tap to view, store, and load Projects and Scenes on your mixer’s
local memory.
2. Import/Export Tab. Click / Tap to transfer Project and Scenes between you mixer memory and the device
running this instance of Universal Control.
3. Currently Loaded Project. Displays the name of the Project file that is currently loaded on your
StudioLive mixer.
4. Store Project. Click / Tap to store your current global settings as a new Project or to update an existing
Project file.
5. Recall Project. Click / Tap to load the currently highlighted Project file. Note that because Projects are
altering parameters of global functions, they take slightly longer to load. Because of this PreSonus
recommends loading Projects prior before mixing a session live.
6. Scene Safe Tab. Click / Tap to select channels that will not be effected by a Scene recall.
7. Reset to Default. Click / Tap to reset all global parameters to their factory default. This includes all digital
patching and FlexMix modes.
8. Lock Project. Click / Tap to lock the currently selected Project library slot. This will prevent the file from
being overwritten. When this is enabled, no new data can be stored to this location until it is unlocked.
9. Currently Loaded Scene. Displays the name of the Scene file that is currently loaded on your
StudioLive mixer.
10. Store Scene. Click / Tap to store your correct mix settings as a new Scene within the current Project or to
update an existing Scene file.
11. Recall Scene. Click / Tap to load the currently highlighted Scene file.
12. Reset to Default. Click / Tap to reset all mix parameters to their factory default. This will not reset Global
parameters like digital patching and FlexMix modes.
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15
16
17
18
Bekijk gratis de handleiding van PreSonus Quantum ES 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Quantum ES 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17151 MB |
