PreSonus Quantum ES 4 handleiding
Handleiding
Je bekijkt pagina 26 van 97
22
6 Mix Controls
6.5 Filter DCAs
Universal Control for StudioLive
®
Mixers
Software Reference Manual
8. High-Pass Filter. Sets the High-Pass Filter Frequency Threshold for the Selected Channel or Output Bus.
The filter’s threshold can be set from 24 Hz to 1 kHz. When the meter is set to its lowest point, the filter is
off. The high-pass filter is available on all input channels and on auxiliary and FX output buses only.
Power User Tip: A high-pass filter attenuates all frequencies below the set threshold. Use the Fat
Channel high-pass filter to remove unwanted low frequencies from your source signal, rather than trying
to EQ them out
When a FlexMix subgroup is selected, you will find the Edit button in the Mix Detail area of the
Fat Channel. Clicking this button will allow you to route input channels to this subgroup.
1. Click on the channels you would like assigned to the subgroup. The channel will highlight as it is
selected, indicating that it has been routed to the subgroup.
2. Click the Done button when you’ve assigned the desired channels
6.5 Filter DCAs
Professional mixing consoles have addressed the problem of managing complex mixes with population
groups that reduce the channels you’re viewing at one time and DCAs that control the overall level of a group
of channels.
We’ve combined the best aspects of these solutions with Filter DCAs. A Filter DCA can contain any
combination of the available input channels and effects returns, and you can create up to 24 Filter DCA
groups as you need. You can even include the same channel in multiple Filter DCAs so you can manage mixes
in multiple ways. Each group is given a master level control so you can control the overall level of the group
while maintaining each channel’s relative balance in the mix. In this way, for example, you can create a single
fader to control every drum in a monitor mix and maintain the relative level of the drum mix that you created.
Once selected, a Filter DCA group stays active until exited regardless of which mix is selected. This allows
you to adjust the group independently across different mixes. You can also flip between groups on the fly to
change the view of a selected mix.
Note: Filter DCAs are not available for StudioLive AI-series console mixers.
Bekijk gratis de handleiding van PreSonus Quantum ES 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Quantum ES 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17151 MB |
