Prebena 2XR-J50 handleiding
Handleiding
Je bekijkt pagina 25 van 60
25
For hose lengths of over 10 m, it cannot be guaranteed that a sufficient supply
of lubricant will reach the tacker. For this reason, we recommend oiling the tool
directly through the air input with 2-5 drops of the recommended oil daily
before use (see TECHNICAL SPECIFICATIONS) or to build an oiler directly onto
the tool.
Make sure that the pressure in the compressed air lines does not
exceed the maximal admissible operating pressure of the tacker.
First set the air pressure to the lowest working pressure (see
TECHNICAL SPECIFICATIONS). Empty the magazine so that no
fasteners are ejected during the next step, in case parts inside the
tacker did not return to the initial position due to repairs, maintenance or trans-
port. Connect the tacker to the compressed air source using a compressed air
hose equipped with a rapid action coupling.
Verify that the tacker is in optimal working condition by settinq the muzzle
against a piece of wood and pulling the trigger once or twice.
3. Connecting the tacker to the compressed air line
PREBENA-Pneumatic staplers and nailers
ENGLISH
Bekijk gratis de handleiding van Prebena 2XR-J50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 2XR-J50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5198 MB |
