Prebena 1A-AZ25BNH handleiding
Handleiding
Je bekijkt pagina 110 van 144
Tacker operation 1A-AZ16BNH / 1A-AZ25BNH
40
- Triggering occurs only when the trigger safety is pressed.
- One fastener must be driven into the carton material for each
pull of the trigger.
To obtain the desired bent shape, change the operating pressure.
Repeat these steps as needed.
The tacker is now ready for operation.
Single triggering
The unit is set up for single triggering. For repeated driving
operations, it is necessary to actuate the trigger safety and the trigger
lever every time.
WARNING
Accidentally triggering when changing the
trigger setting can cause severe or fatal injury.
Do not point the tacker at yourself, people
or animals.
The device must not be used in the following cases:
For applications that require the tacker to be moved across
scaffolding, stairs, ladders, or ladder-like structures.
For closing crates or boxes.
For applying transport locks.
Set drive depth 1A-AZ16BNH / 1A-AZ25BNH
You can set the drive depth of the fastener into the carton material by
controlling the operating pressure.
Bekijk gratis de handleiding van Prebena 1A-AZ25BNH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 1A-AZ25BNH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12657 MB |
