Practixx PX-BTS-370 handleiding
Handleiding
Je bekijkt pagina 31 van 48
Sharpening set 12 pieces, consisting of:
3 x sanding paper grain size 80/120/180
respectively
1 x sanding belt grain size 80/120/180
respectively
− Article number: 7903302601
Belt - Article number: 39033019001
16.2 Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consumables.
Wearing parts*: Abrasives, toothed belts
* = may not be included in the scope of delivery!
17 Disposal and recycling
Notes for packaging
The packaging materials are re-
cyclable. Please dispose of pack-
aging in an environmentally
friendly manner.
Notes on the electrical and electronic equipment
act [ElektroG]
Waste electrical and electronic equipment
does not belong in household waste, but
must be collected and disposed of separately!
• Used batteries or rechargeable batteries that are
not installed permanently in the old appliance must
be removed non-destructively before disposal! Their
disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
– Public disposal or collection points (e.g. munici-
pal works yards)
– Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
– Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a
new device from the manufacturer or taken to
another authorised collection point in your vicini-
ty.
– Further supplementary take-back conditions of
the manufacturers and distributors can be ob-
tained from the respective customer service.
• If the manufacturer delivers a new electrical appli-
ance to a private household, the manufacturer can
arrange for the free collection of the old electrical
appliance upon request from the end user. Please
contact the manufacturer’s customer service for
this.
• These statements only apply to devices installed
and sold in the countries of the European Union and
which are subject to the European Directive
2012/19/EU. In countries outside the European
Union, different regulations may apply to the dispos-
al of waste electrical and electronic equipment.
18 Troubleshooting
Fault Possible cause Remedy
Engine does not start On/off switch damaged Replace all damaged parts before you use your
sander again. Contact your local service centre or an
authorised service station. Every attempt to carry out
a repair, can be dangerous if it is not done by skilled
personnel.
On/off cable damaged
On/off relay damaged
The product becomes slower
during work
Too much pressure is ap-
plied to the workpiece.
Apply less pressure to the workpiece.
Grinding belt comes off the
drive pulleys.
It does not run straight. Reset the track.
Wood gets burnt during sand-
ing.
Sanding disc or belt is cov-
ered with grease.
Replace grinding belt or sanding disc.
Excessive pressure was ap-
plied to the workpiece.
Reduce the pressure applied to the workpiece.
GB | 31www.practixx.com
Bekijk gratis de handleiding van Practixx PX-BTS-370, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Practixx |
| Model | PX-BTS-370 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6461 MB |
