PowerWalker VFI 1000 LICR IoT handleiding

Niet gecategoriseerd

PowerWalker

36 pagina's

PDF beschikbaar

Handleiding

carry sucient informaon to enable the replacement of the baery with a suitable

recommended type.

෮ CAUTION: Do not dispose of baeries in a re. The baeries may explode. Dispose of

used baeries according to the instrucons.

෮ Do not open or mulate baeries. Released electrolyte is harmful to the skin and eyes.

It may be toxic.

෮ CAUTION – A baery can present a risk of electrical shock and high short circuit cur-

rent. The following precauons should be observed when working on baeries:

• Remove watches, rings, or other metal objects.

• Use tools with insulated handles.

• Wear rubber gloves and boots.

• Do not lay tools or metal parts on top of baeries.

• Disconnect charging source prior to connecng or disconnecng baery terminals.

• Determine if baery is inadvertently grounded. If inadvertently grounded, remove

source from ground. Contact with any part of a grounded baery can result in elec-

trical shock. The likelihood of such shock can be reduced if such grounds are re-

moved during installaon and maintenance.

• Failed baeries can reach temperatures that exceed the burn thresholds for touch-

able surfaces.

Product safety

• The UPS connecon instrucons and operaon described in the manual must be fol-

lowed in the indicated order.

• UPS enclosure IP rang IP20.

• The upstream circuit breaker for Normal AC/Bypass AC must be easily accessible.

• for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device shall

be incorporated external to the equipment

• for PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and

shall be easily accessible

• Check that the indicaons on the rang plate correspond to your AC powered system and

to the actual electrical consumpon of all the equipment to be connected to the system.

• Never install the system near liquids or in an excessively damp environment.

• Never let a foreign body penetrate inside the system.

• Never block the venlaon grates of the system.

• Never expose the system to direct sunlight or source of heat.

• If the system must be stored prior to installaon, storage must be in a dry place.

• The admissible storage temperature range is -25°C to +55°C without baeries, 0°C to

+40°C with baeries, suggest to storage the baery below 25°C.

• This UPS can be used in TN/IT/TT power system

Bekijk gratis de handleiding van PowerWalker VFI 1000 LICR IoT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.