PowerWalker VFI 1000 LICR IoT handleiding

Niet gecategoriseerd

PowerWalker

36 pagina's

PDF beschikbaar

Handleiding

Operaon status Cause Descripon

Standby mode The UPS is O without output.

Online mode The UPS is operang normally and protecng the equipment.

1 beep every 4

seconds

Baery mode

A ulity failure has occurred, and the UPS is powering the

equipment with baery.

Prepare your equipment for shutdown.

1 beep every 1

seconds

Baery mode with

baery low

This warning is approximate, and the actual me to shutdown

may vary signicantly.

High Eciency mode

Once the mains are loss or abnormal, the UPS would transfer

to Line mode or Baery mode and the load is supplied

connuously.

Converter mode

The UPS would free run with xed output frequency (50Hz

or 60Hz).

The load should be derang to 60% in converter mode.

Bypass mode

Overload or fault has occurred, or a command has been

received, and the UPS is in Bypass mode.

Baery test UPS is execung a baery test

Baery fail The UPS detects bad baery or baery disconnected

Overload Some unnecessary loads should be cut o to reduce the load.

Fault mode Some fatal problems happened.

Bekijk gratis de handleiding van PowerWalker VFI 1000 LICR IoT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.