PowerWalker Solar Inverter 6k SAN 3/3 handleiding

Niet gecategoriseerd

PowerWalker

69 pagina's

PDF beschikbaar

Handleiding

by BlueWalker GmbH

PowerWalker User Manual

1.2 Important Safety Precaution Instructions

DANGER

• Installation, maintenance, and connection of inverters must be carried out by qualified

personnel in compliance with local regulations and the requirements of local authority

and/or electricity company.

• The temperature of some parts of the inverter may exceed 60

℃

during operation. DO

NOT touch the inverter during operation to avoid burns.

• Keep children away from the inverter.

• DO NOT open the inverter. Except for work on the wiring terminal (as described in this

manual), unauthorized touching or changing of components may result in personal

injury, damage to the inverter, and void the warranty.

DANGER

• Ensure that the maximum open-circuit voltage of the PV modules connected together

(string) must not exceed the maximum rated input voltage of the inverter, otherwise the

inverter may be damaged, and the warranty may be invalidated.

DANGER

• The PV array generates a dangerously high DC voltage when exposed to sunlight. Please

operate in accordance with our instructions, otherwise there is a danger to life.

• Connect and ground the frame of PV modules and the electrically conductive surface

according to local regulations. DO NOT connect PV strings with ground faults to the

inverter.

DANGER

• The inverter must be completely isolated before maintenance. Completely isolate the

inverter by: turning off the PV switch and disconnecting the PV terminal, battery terminal

and AC terminal.

DANGER

• After the inverter has been disconnected, the residual electricity and heat can still cause

electric shock and burns. Do not touch any part of the inverter for 10 minutes after

disconnecting it from the power source.

DANGER

• DO NOT plug or unplug the AC and DC terminals while the inverter is running.

DANGER

• DO NOT connect the inverter in the following ways:

- The BACKUP port should not be connected to the grid.

- A single PV panel string should not be connected to two or more inverters.

WARNING

• Static electricity can damage electronic components. Appropriate methods must be used

to prevent such damage to the inverter, otherwise the inverter can be damaged, and the

warranty may be invalidated.

CAUTION

• If the equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

CAUTION

• Due to heavy weight of the product, please transport and lift the product carefully with

two persons.

• Incorrectly transport or lift of the product may cause injury or product damage.

NOTICE

• PV modules should comply with IEC61730 Class A.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 6k SAN 3/3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.