PowerWalker Solar Inverter 5000 ZRO Handleiding (84 Pagina's)

Handleiding

9

Final Assembly

After connecting all wirings, please put bottom cover back by screwing two screws as shown on the below

chart.

Remote Display Panel Installation

The LCD panel can be removable and installed in a remote site with an optional communication cable. Please

follow below steps to implement this remote panel installation.

Step 1. Loosen the screw on the two sides of bottom case and push up the case cover. Then, remove screw on

the top of the display panel. Now, the display can be removed from the bottom case. Then, pull out the cable

from the remote communication port.

Step 2. Drill two holes in the marked locations with two screws as shown below chart. Place the panel on the

surface and align the mounting holes with the two screws. Then, use one more screw on the top to fix the panel

to the wall and check if the remote panel is firmly secured.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 5000 ZRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.