Posiflex RA-105 handleiding
Handleiding
Je bekijkt pagina 77 van 128
Enter Setup
Exit Setup
- 86 -
6.13.3 Parity
Standard 25 barcode data is not mandatory to include a check digit. If there is a
check digit, it is the last character of the data. The check digit is a value calculated
based on all data to check whether the data is correct.
Set to "None parity", the scanner will transmit all barcode data normally.
Set to "Check but not send check digit", the scanner will check according to the last 1
digit of the barcode. If the check is passed, the normal data (check digit excluded)
will be transmitted. If the check fails, the barcode reading failure will be prompted.
Set to "Check and send check digit", the scanner will check the last 1 digit of the
barcode. If the check is passed, the check digit will be transmitted as the last 1 digit
of normal data. If the check fails, the barcode reading failure will be prompted.
None parity (Default)
$>:S020092.<$
Check but not send check digit
$>:S060292.<$
Check and send check digit
$>:S060692.<$
6.13.4 Length Settings
The user can set the maximum and minimum length of barcode reading. If read
barcode length does not match the set effective length, the barcode reading is
unsuccessful, and the scanner will not send the barcode content to the host.
Bekijk gratis de handleiding van Posiflex RA-105, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Posiflex |
| Model | RA-105 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20986 MB |
