Handleiding
Je bekijkt pagina 8 van 53
7
GB
Function setting
Repeatedly press the "Mode" key so that the heater switches in the order
of "high gear - low gear - fan - ECO mode - high gear".
Temperature setting
In the working state of the machine, press "+" or "-" to set the temperature
value.
Set the temperature range between 5-35 degress C.When the room
temperature reaches the set temperature, the display flashes 10S, and the
machine enters the standby state. When the temperature is lower than
the set temperature, the machine starts to heat up again.
Timing function
Timing stop
When the heater is turned on, press the TIMER key to enter the timing
stop state (within 0-24 hours). Press the “+” key once to increase the
timing stop time by 1 hour, and press the “-” key once to decrease the
timing stop time by 1 hour.
Timing start
When the heater is in standby mode, press the TIMER key to enter the
reservation start mode (within 0-24 hours), then press the “+” key once to
increase the reservation start time by 1 hour, and press the “-” key once to
decrease the reservation start time by 1 hour.
Swing function
When the heater is in operation mode, press the "swing" key to open the
swing function. Press the "swing" key again to turn o the swing
function. When the heater stops heating function, the wind swinging
function also stops.
Bekijk gratis de handleiding van Point POHF4020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POHF4020 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2949 MB |
