Handleiding
Je bekijkt pagina 15 van 72
WATER DRAINAGE
• During dehumidifying modes, remove the upper drain plug
from the back of the unit, install the drain connector (5/8"
universal female mender) with 3/4" hose (locally purchased).
For the models without drain connector, just attach the drain
hose to the hole. Place the open end of the hose directly over
the drain area in your basement floor.
Remove the
upper drain plug
Continuous
drain hose
• During heating pump mode, remove the lower drain plug from the back of the unit, install
the drain connector (5/8" universal female mender) with 3/4" hose (locally purchased).
For the models without drain connector, just attach the drain hose to the hole.
Place the open end of the Hose adaptor directly over the drain area in your basement floor.
NOTE: Make sure the hose is secure so there are no leaks. Direct the hose toward the
drain, making surethat there are no kinks that will stop the water flowing. Place the
end of the hose into the drain and make sure the end of the hose is down to let the
water flow smoothly. (See Figs with®. Do never let it up. (See Figs with®). When the
continuous drain hose is not used, ensure that the corresponding drain plug and knob
are installed firmly to prevent leakage.
Remove the
lower drain plug
Continuous
drain hose
drain hose
adaptor
delivery lift≦1.8M
Press the power
cord buckle into
the rear cover.
drain hose
adaptor
drain hose
adaptor
During heating pump mode, remove the lower drain plug from
the back of the unit, install the drain connector (5/8" universal
female mender) with 3/4" hose (locally purchased). Carefully
move the unit to a drain location, and let the water drain away.
Note: Make sure the drain hose is lower than the bottom tray
drain outlet.
Remove the
lower drain plug
Continuous
drain hose
When the water level of the bottom tray reaches a predetermined
level, the unit beeps 8 times, the digital display area shows "PI". At
this time the air conditioning/dehumidification process will
immediately stop. However, the fan motor will continue to operate
(this is normal). Carefully move the unit to a drain location, remove
the bottom drain plug and let the water drain away. Reinstall the
bottom drain plug and restart the unit until the "PI" symbol
disappears. If the error repeats, call for service. NOTE: Be sure to
reinstall the bottom drain plug firmly to prevent leakage before
using the unit.
Maintenance
Safety Precautions
• Always unplug the unit before cleaning or servicing.
• DO NOT use flammable liquids or chemicals to clean the unit.
• DO NOT wash the unit under running water. Doing so causes electrical danger.
• DO NOT operate the unit if the mains power cable was damaged during cleaning. A
damaged mains power cable must be replaced with a new one from the
manufacturer.
Air filter Cleaning
Maintenance Tips
•Be sure to clean the air filter every 2 weeks for optimal
performance.
•The water collection tray should be drained
immediately after PI error occurs, and before storage to
prevent mold.
•In households with animals, you will have to
periodically wipe down the grill to prevent blocked
airflow due to animal hair.
CAUTION
DO NOT operate the unit without the filter
because dirt and lint will clog it and reduce
performance.
Upper filter
(take out)
Remove the
screw, then
take the lower
filter out
Unit Cleaning
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry,
lint-free cloth.
Store the unit when not in use
• Drain the unit's water collection tray according to the instructions in the following
section.
Run the unit on FAN mode for 12 hours in a warm room to dry it and prevent mold.
Turn o the unit and unplug it.
• Clean the air filter according to the instructions in the previous section. Reinstall the
clean, dry filter before storing.
• Remove the batteries from the remote control.
Note: Be sure to store the unit in a cool, dark place. Exposure to direct sunshine or
extreme heat can shorten the lifespan of the unit.
Note: The cabinet and front may be dusted with an oil-free cloth or washed with a
cloth dampened in a solution of warm water and mild liquid dishwashing detergent.
Rinse thoroughly and wipe dry. Never use harsh cleansers, wax or polish on the cabinet
front. Be sure to wring excess water from the cloth before wiping around the controls.
Excess water in or around the controls may cause damage to the unit.
2928
GB
Bekijk gratis de handleiding van Point POAC8212, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Point |
| Model | POAC8212 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 9076 MB |
