Planet LCG-350W-NR handleiding
Handleiding
Je bekijkt pagina 51 van 119
Industrial Outdoor LoRaWAN 5G NR Cellular Gateway
LCG-350W-NR
- 51 -
4.5.3 Routing
Please refer to the following sections for the details as shown in Figures 4-5-6 and 4-5-7.
Figure 4-5-6: Routing table
Figure 4-5-7: Routing setup
Routing tables contain a list of IP addresses. Each IP address identifies a remote LoRaWAN Gateway
(or other network gateway) that the local LoRaWAN Gateway is configured to recognize. For each IP
address, the routing table additionally stores a network mask and other data that specifies the
destination IP address ranges that remote device will accept.
Object
Description
Type
There are two types: Host and Net.
When the Net type is selected, user does not need to input the Gateway.
Destination
The network or host IP address desired to access.
Net Mask
The subnet mask of destination IP.
Gateway
The gateway is the router or host’s IP address to which packet was sent. It
must be the same network segment with the WAN or LAN port.
Interface
Select the interface that the IP packet must use to transmit out of the router
when this route is used.
Comment
Enter any words for recognition.
Bekijk gratis de handleiding van Planet LCG-350W-NR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | LCG-350W-NR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20336 MB |
