Planet IXT-815AT handleiding
Handleiding
Je bekijkt pagina 16 van 23
16
5. Fiber and UTP Cable Connection
Installing the SFP+ Transceiver
The sections describe how to insert an SFP+ transceiver into an SFP+ slot.
The SFP+ transceivers are hot-pluggable and hot-swappable. You can plug in and
out the transceiver to/from any SFP+ port without having to power down the
Industrial Media Converter
MTB Series Transceiver
Figure 5-1: Plug in the SFP+ Transceiver
It is recommended to use PLANET SFP+ on the Industrial Media
Converter. If you insert an SFP+ transceiver that is not supported, the
Industrial Media Converter will not recognize it.
10GBASE-X SR/LR:
Before connecting the other switches, workstation or media converter, please do the
following:
1. Make sure both sides of the SFP+ transceiver are with the same media type; for
example, 10GBASE-SR to 10GBASE-SR, and 10GBASE-LR to 10GBASE-LR.
2. Check whether the ber-optic cable type matches the SFP+ transceiver model.
To connect to 10GBASE-SR SFP+ transceiver, use the multi-mode ber cable
with one side being the male duplex LC connector type.
To connect to 10GBASE-LR SFP+ transceiver, use the single-mode ber cable
with one side being the male duplex LC connector type.
Bekijk gratis de handleiding van Planet IXT-815AT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IXT-815AT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2723 MB |
