Planet IVC-234GPT handleiding
Handleiding
Je bekijkt pagina 7 van 25
7
When the Industrial Ethernet Extender operates in CPE mode, DIP
switches 2, 3, and 4 are out of function.
DIP-2: Transmission (G. INP and Interleave mode)
G. INP
Method of protection against bursts from other devices or lines
to impact your xDSL line.
Interleave
Method of error correction used on xDSL line. Interleave requires
additional latency to improve resilience to burst of error.
DIP-3: Band Prole (Asymmetric/Symmetric)
Asymmetric
Asymmetric mode provides more bandwidth than the other side.
This mode provides the highest bandwidth in short range.
Symmetric
With G.997 band plan supported, symmetric mode can provide
almost the same rate of downstream and upstream.
DIP-4: SNR (Signal Noise Ratio) Margin
When the SNR margin is selected, the system provides 12dB/8dB SNR margin for
all usable loop lengths. Better channel noise protection is made with the higher SNR
margin.
Please power off the Industrial Ethernet Extender before making any
transmission mode adjustment.
PoE Power Usage LED (IVC-234GPT Only)
The front panel of the IVC-234GPT has four Gigabit Ethernet 802.3at PoE+ ports,
and four LEDs which indicate PoE Power Usages of 30W, 60W, 90W and 120W. With
these LED indications, you can monitor the current PoE power-in-use status of the
IVC-234GPTeasilyandeciently.
PoE Usage
120W
90W
60W
30W
1
2
Bekijk gratis de handleiding van Planet IVC-234GPT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IVC-234GPT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2865 MB |
