Planet IVC-234GPT handleiding
Handleiding
Je bekijkt pagina 6 van 25
6
VDSL Port BNC/RJ11 DIP Switch
One DIP switch for RJ11 female phone jack and one BNC female connector
for better VDSL2 transmission performance.
BNC
BNC RJ11
RJ11
VDSL Port
Mode
DIP Switch
Description
RJ11
Choose this mode when using RJ11 VDSL2
transmission for better performance.
BNC (Default)
Choose this mode when using BNC VDSL2
transmission for better performance.
VDSL DIP Switch
The Industrial Ethernet Extender provides 4 selective transmission modes. By
switching to a transmission mode, it can optimize transmission based on the quality
and distance of your coaxial cable or phone line. The following is the summary table
of transmission setting, bandwidth and distance.
DIP-1 DIP-2 DIP-3 DIP-4
Mode Transmission BandProle SNR Margin
OFF CO G.INP Asymmetric 12dB
ON (Default) CPE Interleave Symmetric 8dB
DIP-1: Mode (CO/CPE)
By default, the four DIP switches, set at the “ON” position, are oper-
ated as “CPE”. For operating as “CO”, please turn DIP 1 Switch to the
“OFF” position. Then adjust the other DIP switches accordingly to fulfill
different network application demands.
CO
(CentralOce)
The Master device mode, usually the CO device, is located at the
data center of ISP or enterprise to link to the backbone.
CPE
(Customer
Premises
Equipment)
The Slave device mode, usually the CPE device, is located at a
branchoceorremotesideasthelongreachdatareceiver.The
CPE can be connected to the PC, IP camera or wireless access
point or other network devices.
Bekijk gratis de handleiding van Planet IVC-234GPT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Planet |
| Model | IVC-234GPT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2865 MB |
