PKM GSP12-4DFI handleiding
Handleiding
Je bekijkt pagina 108 van 144
~ 108 ~
5. The programme indicator displays the current status of the water softener
consumption by lighting up the corresponding LED combination: e.g. water
softener level «
H 3 » = LED 3 and LED 4 goes on (s. table below).
STEP 2: SETTING OF THE WATER SOFTENER CONSUMPTION
1. To select the proper water softener consumption setting according to your local
requirements, press the «
PROGRAMME » - BUTTON repeatedly until the desired
water softener level (H 1 - H 6) is displayed by the corresponding LED
combination lighting up on the programme indicator (s. table below).
2. Each press of the «
PROGRAMME » - BUTTON changes the consumption setting by
one level and the corresponding LED combination goes on. The settings are
consecutive: H
1 → H 2 → H 3 → H 4 → H 5 → H 6 → H 1 (s. table below).
Water softener (= dishwasher salt) is added to a running programme by the
appliance automatically. When and how much water softener the appliance adds
to a running programme depends on the individually set water softener level
(H
1 - H 6); s. relevant table in chapter 4.1.2 WATER HARDNESS LEVELS / WATER
SOFTENER CONSUMPTION
.
WATER HARDNESS
RANGE
S
ETTING OF
THE WATER
SOFTENER
CONSUMPTION
PROGRAMME INDICATORS
°dH LED 6** LED 3** LED 4**
0 - 5 H 1 - - on
6 - 11 H 2 - on -
12 - 17 H 3* - on on
18 - 22
H
4
on
-
-
23 - 34 H 5 on - on
25 - 55
H
6
on
on
-
* FACTORY SETTING
**
S
EE FIG
.
BELOW
.
Bekijk gratis de handleiding van PKM GSP12-4DFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PKM |
| Model | GSP12-4DFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24942 MB |
