Physa PHY-ND-3 handleiding
Handleiding
Je bekijkt pagina 15 van 153
EN
Spin the wrench again until the nose tip is disassembled and then bearings can be replaced.
However, if the process is not followed properly, the nose tip may be damaged or broken. Do not
dismantle unless you are a qualified engineer.
A – Spindle unit
1. Fix the wrench to the coiled chuck in spindle unit and turn to the arrow mark direction with
screwdriver.
2 Change the chuck.
Caution!
Clean and assemble the chuck very carefully.
Do not dismantle the handle and motor part unless you are a qualified engineer – it may cause the
breakage.
*if the chuck is not open, please turn it with the wrench.
SUGGESTION FOR MAINTENANCE
1 Keep the place around in handpiece clean from dust and grindings.
2 Remove dust on handpiece wiping with isopropyl alcohol and avoid wet inside.
*Do not apply the oil to the goods of clean with water.
The grease inside of the bearing could melt away due to the oil.
3 Air cleaning is acceptable, but air pressure may affect the handpiece or motor.
4 Insertion and removal of bur
Turn the handle in the open direction to open the chuck.
Then, the chuck is opened, and the bur is removed. Turn the handle in the close direction and the
chuck is closed and the but is recurred, turn the ring until a click sound.
FOR YOUR SAFETY, KEEP TO THE FOLLOWING
• Do not use with damaged or faulty power cord, plug and outlet. Contact the manufacturer. It
may cause danger of fire or electric shock.
• To unplug the power cord, hold the plug and do not touch with wet hand. Do not use with
loose power plug because of danger of electric shock and fire.
• Do not bend the power cord excessively and do not press with heavy things. It may cause
electric shock and fire.
• Do not place near heat equipment and candles or cigarette which can cause fire.
• Close supervision is needed if this product is used by or near very young, elderly or invalid
people.
• Do not leave children unattended in any room where this product has been installed.
o Type of protection against electric shock:
Class I equipment
Bekijk gratis de handleiding van Physa PHY-ND-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Physa |
| Model | PHY-ND-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24257 MB |
