Physa PHY-ND-3 handleiding
Handleiding
Je bekijkt pagina 11 van 153
EN
This User Manual has been translated for your convenience using machine translation.
Reasonable efforts have been made to provide an accurate translation; however, no
automated translation is perfect nor is it intended to replace human translators. The
official User Manual is the English version. Any discrepancies or differences created in
the translation are not binding and have no legal effect for compliance or enforcement
purposes. If any questions arise related to the accuracy of the information contained in
the User Manual, please refer to the English version of those contents which is the official
version.
Technical data
Parameter description Parameter value
Product name
Nail Drill
Model
PHY-ND-3
Rated voltage [V~] / frequency [Hz]
220V~240V/50~60 Hz
Rated power [W]
65
Protection rating IP
Equipment: IPXO
Foot Switch: IPX1
Dimensions [width x depth x height; mm]
245 x 205 x 100
Weight [kg]
1.67
Speed [rpm]
0 – 35 000
This product is not intended for dental and medical use.
SETTING AND OPERATION
1 After checking off-switch in control box, plug in.
2 Connect the handpiece to the output of the control box.
3 Set the Speed dial of control box to ‘0’.
Caution!
In case of easy chuck change type or front-chuck-open type, please use it after checking the bur
completely lock. This is because the chuck could be loose after chuck or bur change.
4 Hold handpiece with one hand and with the other hand, turn on the power of control box.
5 Check handpiece is running normally controlling speed dial in control box.
6 Turn off the power and connect the foot pedal to the control box. Check speed operating of the
pedal.
7 Turn off the power and switch to reverse direction. Turn on the power and check the operation.
CAUTION
Please turn off the switch when you do not use the unit.
1 Do not work in a dangerous place. Do not use the control box in a humid place.
2 Transport and storage conditions:
Temperature 10-40°C
Humidity: 30-75% RH
Atmospheric Pressure:700 hPa to 1060 hPa
3 Our handpiece and foot pedal should only be used for our control unit.
4 Bur (drill)
Dimensions of bur: 2.35mm
Minimum fitting length of the bur: 10 mm
Bekijk gratis de handleiding van Physa PHY-ND-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Physa |
| Model | PHY-ND-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24257 MB |
