Phoenix Contact TC MOBILE I/O X200-4G AC handleiding

Niet gecategoriseerd

Phoenix Contact

82 pagina's

PDF beschikbaar

Handleiding

TC MOBILE I/O...4G

26 / 82 Phoenix Contact

107812_en_08

4.3 Configuration

• Connect the device to the PC via a USB cable. Use the cable CABLE-USB/MINIUSB-

3.0M (item number 2986135).

During configuration, the device is supplied with power via the USB cable. An additional

power supply unit is therefore not necessary.

4.3.1 Operating system

You can use the following operating systems to configure the device:

– Windows

– Linux and Mac OS

When configuring with virtual machines (VM), page loading is slowed down. We therefore

do not recommend using a virtual machine.

You can find which operating system has been set under “Diagnostics”. To change the op-

erating system, carry out the following steps:

• Disconnect the device from the supply voltage.

• Press down and hold the reset button.

• Switch the supply voltage back on.

• Press and hold the reset button until the device LED flashes.

4.3.2 Initial startup

• Windows

: the device will be recognized as a virtual CD drive. If the autostart func-

tion is deactivated, start Setup.exe from the virtual CD drive. The driver for the device

will be installed.

• Linux und Mac OS

: the driver is already integrated into the operating system.

Bekijk gratis de handleiding van Phoenix Contact TC MOBILE I/O X200-4G AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.