Phoenix Contact QUINT4-PS/3AC/24DC/20 handleiding

Niet gecategoriseerd

Phoenix Contact

36 pagina's

PDF beschikbaar

Handleiding

QUINT POWER Software

12 / 36

PHOENIX CONTACT 107309_en_02

4.7 Writing data

If you have adapted the configuration or created an individual profile, transfer the data to the

power supply.

1. Switch the power supply off or to SLEEP MODE.

2. Click on the “Write” button in the main menu.

3. Hold the TWN4 MIFARE NFC USB ADAPTER in front of the NFC symbol on the power

supply. Communication is established automatically and signaled by the flashing red

DAT LED. The data is transferred to your power supply via the NFC interface.

When parameterization is completed and you do not wish to make any further settings, you

can switch the power supply on.

4.8 Saving the profile

If you would like to use your individual configuration to parameterize other power supplies,

you can save and archive the profile.

1. In the menu bar, open “Profile”.

2. Select the "Save configuration as…" function

3. Select a storage location on your PC.

4.9 Saving a log file

After every write operation the software saves the set parameters in an automatically gen-

erated log file. You can change the storage location of the log file as follows:

1. In the menu bar, open “Settings, Options”.

2. Under “Path of Log-Files” select a storage location on your PC. To do this, click on the

“...” button.

3. Now save your settings.

The individual profile for your power supply is stored on your PC. You can ac-

cess it again at any time as and when required.

Bekijk gratis de handleiding van Phoenix Contact QUINT4-PS/3AC/24DC/20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.