Phoenix Contact MINI MCR-2-I-I-ILP Handleiding (58 Pagina's)

Handleiding

MINI Analog supply options

105810_en_02 Phoenix Contact 13 / 56

Then determine the maximum total current consumption of all eight modules.

The total current consumption of 158 mA is less than the maximum permissible current

for supply via a module. The fuse to be connected upstream of the supply signal condi-

tioner should have a nominal current of 500 mA. To ensure that the fuse definitely trips

in the event of a short circuit, the 24 V DC supply in this example is provided by a

QUINT4-PS/1AC/24DC/3.8/SC (item no. 2904599). The structure is shown in

Figure 3-2 on page 13. The wiring is as shown in Figure 3-1 on page 12.

Figure 3-2 Example for direct supply via a module

In addition to the low maximum number of modules, another disadvantage of this

method of supply is that fault monitoring is not possible. However, this function is

provided by the method of supply described in the next section.

       



     

 

8

7

6

5

QUINT4-PS/1AC/24DC/3.8/SC

UT 4-HESILED 24 (5X20)

MINI MCR-SL-PT100-UI-200-NC

MINI MCR-SL-UI-UI-NC

MINI MCR-SL-PT100-UI-200-NC

Bekijk gratis de handleiding van Phoenix Contact MINI MCR-2-I-I-ILP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.