Phoenix Contact FL SWITCH EP7400 handleiding
Handleiding
Je bekijkt pagina 27 van 46
Installation
4083_en_C PHOENIX CONTACT 27/46
6. Connect pin 12 to the ground of the chassis. The ground terminal is used as the
ground conductor for surge and transient suppression circuitry internal to the unit.
4.6.3 PoE power
NOTE:
FL SWITCH EP7400 -M8POE requires the FL SWITCH EP7428R-L3F1P.
To power the FL SWITCH EP7400 -M8POE, an additional power source of 56 V DC and
13 A is required. This provides a maximum of 720 W.
Figure 4-8 PoE power connection (shown on AC power module)
4.6.4 Connecting the ground
Figure 4-9 Connecting ground
13579111315
2 4 6 8 10 12 14 16
NO
PEPEPE
NC
+
DC
LNL
AC
N
AC
PE = Protective earth
NO = Normally open
NC = Normally closed
PoE power supply
LM2
LM1
1 Factory-installed chassis
ground cable
2 Optional grounding cable (pro-
vided by customer)
3 Nut (provided)
1
2
3
Bekijk gratis de handleiding van Phoenix Contact FL SWITCH EP7400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | FL SWITCH EP7400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4097 MB |
