Philips 6000 Series XC6557 handleiding
Handleiding
Je bekijkt pagina 35 van 70
35
English
Problem Possible cause Solution
The brush is not properly
inserted into the pet nozzle.
Make sure that brush and the pet nozzle
are properly connected and that there is no
gap between the parts. Follow the
instructions in the manual.
The suction power does not
feel stable.
This could be caused by the
activation of the "Floor Type
Recognition" feature. Your
appliance is detecting the floor
type and cleaning with an
optimized performance for that
floor.
If you prefer to clean with a consistent
power of your choice, disable this smart
feature by turning the appliance on and
then off. Immediately after turning it off,
while the display is still lit, press and hold
the "+" button for 4 seconds (see 'Floor
Type Recognition customization').
The Floor Type Recognition
is not reacting logically.
The brush is clogged with hair
or dirt.
Clean the brush with a pair of scissors or by
hand. See the instructions in the user
manual.
The appliance delivers static
shocks.
The appliance builds up static
electricity. The lower the air
humidity, the more state
electricity is build up.
Discharge the appliance by frequently
holding the tube against other metal
objects in the room (for example the legs of
a table or chair, etc.). Or raise the air
humidity level in the room.
The dust and dirt that is
vacuumed up is static.
Empty the dust container and clean the
filter according to the instructions in the
user manual.
Wet cleaning
Problem Possible cause Solution
The water flow from the
water tank is reduced.
The wetting strip is blocked by
dirt.
Remove the wetting strip and clean it. Place
the clean wetting strip back.
The microfiber mopping pad is
not placed correctly and blocks
the wetting strip as a result.
Make sure that you place the mopping pad
correctly. Check the user manual for proper
placement.
The water tank is empty or
nearly empty.
Refill the water tank.
A microfiber mopping pad is
used that is not supplied by
Philips.
Only use an original Philips microfiber
mopping pad. The mopping pads can be
bought in the online Philips shop at
www.philips.com/support or at your
Philips dealer.
Lime scale has build up in the
wetting strip.
Buy a new wetting strip in the online Philips
shop at www.philips.com/support or at
your Philips dealer.
Too much water flows out of
the water tank at a too high
speed.
The water tank cap is not
attached properly.
Check the cap and make sure it is fully and
properly closed.
Bekijk gratis de handleiding van Philips 6000 Series XC6557, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Philips |
| Model | 6000 Series XC6557 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5782 MB |
