Handleiding
Je bekijkt pagina 30 van 62

the display speakers when the device is playing the
sound.
When the DTS Play-Fi compatible device is configured
correctly and switched on, you can select Play-Fi
Wireless Home Theater to set it as audio out device.
eARC
Settings > Display & Sound > Audio output > eARC.
Set eARC mode to Automatic or Off.
Digital Output Settings
Digital output settings are available for optical and HDMI
ARC sound signals.
Digital out format
Settings > Display & Sound > Audio output > Digital
out format.
Set the audio out signal of the display to fit the sound
capabilities of the connected Home Theatre System.
• Stereo (uncompressed): If your audio playback devices
have no multichannel sound processing, select to only
output stereo content to your audio playback devices.
• Multichannel: Select to output multichannel audio
content (compressed multichannel sound signal) or
stereo audio content to your audio playback devices.
• Multichannel (bypass): Select to output Dolby Digital
Plus or DTS content to your audio playback devices or
Home theatre system.
- Make sure your audio playback devices support Dolby
Atmos feature.
- SPDIF output (DIGITAL AUDIO OUT) will be enabled
when streaming Dolby Digital Plus content.
Digital out levelling
Settings > Display & Sound > Audio output > Digital
out levelling.
Adjust the loudness level from device which is connected
to digital audio output (SPDIF) or HDMI.
• Select More to have louder volume.
• Select Less to have softer volume.
Digital out delay
Settings > Display & Sound > Audio output > Digital
out delay.
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio to
the video. Select Off if a sound delay is set on your Home
Theatre System.
Digital out offset (Only available when Digital out
delay set to On)
Settings > Display & Sound > Audio output > Digital
out offset.
If you cannot set a delay on the Home Theatre System,
you can set the display to sync the sound. You can set an
offset that compensates for the time necessary for the
Home Theatre System to process the sound of the display
picture. You can set the value in steps of 5ms. Maximum
setting is 60ms.
30
Bekijk gratis de handleiding van Philips 50PUH8218, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Philips |
Model | 50PUH8218 |
Categorie | Televisie |
Taal | Nederlands |
Grootte | 6923 MB |